The Single Track Bypass© Sliding Barn Door Hardware Kit,
offered exclusively from The Barn Door Hardware Store creates efficiency in tight spaces
offering a two-door system on one track - SAVES SPACE
NOTE: YOUR SLIDING DOORS OVERLAP EACH OTHER AND ARE ALWAYS "CONNECTED".
THIS IS A VERY SPECIAL APPLICATION, PLEASE CALL WITH ANY QUESTIONS BEFORE ORDERING.
YOU CANNOT SLIDE DOORS "APART".
This kit is NOT DESIGNED to use with track that is wider than the door opening.
Excess track length will allow doors to slide out of the way but they will come out of the floor guides on ground.
This kit allows for two of your beautiful barn doors to slide one door over another making it perfect for closets, pantries, or possibly even multiple openings on the same wall.
NOTE: the two doors together must be approx. 6" wider than the opening. The doors overlap each other approx. 3" - the width of the wheels. Example: if you have a 48" opening. your doors need to be at least 54" total width - 27" each. PLEASE call with questions.
The outside door will stick out from the wall approx. 5".
Above the door you need approx 7" clearance for hangers, wheels, and track.
The max weight limit for this system is 250lbs total or 125/door.
You chose your barn door track length - in this case it is the width of your "opening" and we will ship you: the track, 2 sets of hangers (one set standard and one set bypass) with 3" cast steel wheels (4 hangers total), spacers, 2 L-shaped floor mounted door guides designed to fit doors of any thickness, 2 safety anti-jump clips to stop any possible derailment and ALL hardware to attach the doors to track and track to the wall.
This hardware kit comes with everything needed for installation.
- All track lengths over 7 feet will be shipped in two piece
- Steel color and finish can vary from batch to batch and may not be as shown on website
- Our sliding barn door hardware kits will support the weight of all of our barn doors.
Do you have questions about our kits? Visit our FAQ page.